Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Aurora?
A chimney cap installation in Aurora typically runs $150 to $400, and a crown repair or rebuild usually falls between $400 and $1,200. A simple cap replacement with a stock Gelco or Famco unit sits at the low end, while a full crown rebuild with new mortar and flashing pushes toward the top. Those ranges reflect what the Aurora market is paying in 2026 for materials and labor together, and the written estimate sets the final number.
If you’ve watched a hailstorm roll off the Front Range and wondered what it did to the top of your chimney, a cap and crown check is the place to start. Call (855) 368-2029 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Cap & Crown Cost Breakdown (2026)
The table below breaks the job into the line items you’ll actually see on an Aurora estimate. The range for each item covers the material and the labor to install it. A cap and a crown are two different things, so we quote them separately even when both are done on the same visit.
| Work Performed | Typical Aurora Range (2026) | What It Covers |
|---|---|---|
| Single-flue cap, stock size | $150 – $275 | Standard Gelco or Famco cap sized to the flue, fitted and sealed at the top |
| Single-flue cap, custom fabricated | $275 – $400 | Non-standard flue dimensions, stainless mesh, or a specific finish |
| Multi-flue cap | $350 – $1,100 | One cap spanning two or more flues; price tracks the footprint and flue count |
| Crown repair (hairline cracks, sealing) | $400 – $700 | Crack chasing, bonding, and a flexible crown coating that moves with the masonry |
| Crown rebuild | $700 – $1,200 | Removing the failed crown, forming a new sloped pour with an overhang and drip edge |
| Crown rebuild with flashing work | $1,000 – $1,600 | Adds chimney-to-roof flashing repair when the leak is at the roofline, not the crown alone |
| Animal guard or spark screen add-on | $75 – $200 | Mesh screen, band, or guard added to an existing or new cap |
What pushes a price up: a crown that has to come off completely, a chimney wider than a standard single-flue, masonry that’s spalling so the new crown needs a sound footing, or a cap sized for a non-stock flue. What pulls it down: a stock cap on a clean, sound chimney top, or a crown that only needs sealing rather than rebuilding. A rebuild costs more than a repair because we’re pouring and floating new mortar with a proper slope and overhang, which is the part that keeps water off the flue in the first place.
What Affects Chimney Cap & Crown Pricing in Aurora
Aurora’s weather is hard on chimney tops. Late-spring hail, the freeze-thaw swings between a warm afternoon and a cold night, and the UV at this elevation all work on mortar and metal. A crown poured with the wrong mix or a cap that wasn’t sealed down can fail within a few seasons here. That’s the reality behind a lot of the pricing differences you’ll see.
- Hail and wind exposure. Aurora sits where Front Range storms carry hail and knock caps loose. A cap that’s been dented or unseated often needs replacing rather than reseating, and that’s a different line item.
- Freeze-thaw and mortar failure. Water gets into hairline cracks, freezes overnight, and widens them. A crown that looked fine in summer can be spalling by winter. Catching this early keeps you in the $400 – $700 repair band instead of a rebuild.
- Flue count and cap footprint. A single flue takes a standard cap. Two or three flues under one cap take more metal and labor, and the price climbs with the footprint.
- Chimney height and roof pitch. A tall chimney on a steep roof takes more setup and care to reach safely. That labor difference shows up in the quote.
- Masonry condition. If the top courses of brick are spalling, the new crown needs a sound base. Repairing that brick first is the right call, and it adds to the job.
- Material choice. A stainless cap with a heavy mesh lasts longer than a painted steel unit that rusts. We stock Gelco and Famco caps, so you’re getting a professional-grade unit, not a hardware-store substitute.
Cap, Crown, or Both? What Aurora Homeowners Usually Need
A cap and a crown do two different jobs. The crown is the sloped concrete or mortar top of the chimney that sheds water away from the flue. The cap is the metal and mesh cover that sits above the flue opening and keeps rain, birds, and squirrels out. When a chimney leaks in Aurora, the culprit is usually one of these two, and it’s worth getting both checked on the same visit.
A crown rarely fails alone. If water is getting past a cracked crown, that same water has often been reaching the flue for a while, which is the kind of thing a proper inspection catches. Our inspections produce a documented condition report you can present to an insurer, a real-estate agent, or a fire marshal. That matters when you’re buying or selling a home in Aurora and need a chimney assessment you can actually stand behind.
If a crown has been patched and patched again, or you’re pricing a house and the report flags it, one company can handle the sweep, the inspection, and the repair without a handoff. When we’re already looking at the top of the chimney, a chimney sweeping and inspection is a natural addition to the same call.
How to Save on Chimney Cap & Crown
The most reliable way to save is to catch the problem at the repair stage. A cracked crown sealed early costs a fraction of a rebuild, and a cap that’s fitted correctly the first time protects the crown from the rain that caused the crack. Here’s what actually works.
- Get a free estimate before you commit. Prices in Aurora vary, and a written estimate tells you whether you’re looking at a $400 repair or a $1,200 rebuild. Call (855) 368-2029.
- Fix the crown before it fails. Hairline cracks are the cheap moment. Once the crown is spalling and broken away, the price moves to rebuilith.
- Combine cap and crown on one visit. Having both done on the same call saves on setup and labor, and it’s the same crew on the same chimney.
- Choose a cap that lasts. A stainless cap with a heavy mesh outlives a painted steel unit and reduces how often you replace it.
- Don’t skip the screen. An animal guard keeps birds and squirrels out, and a blocked flue is a safety problem you don’t want to discover the hard way.
Every estimate we write is free, and the price you see on it is the price for that job. There’s no fee to call, and no obligation.
Why Use a Chimney Specialist for Cap and Crown Work
Cap and crown work is roof-level masonry and fitting, and it’s not something a general handyman should be guessing at from a ladder. Our technicians have up to experience reading crown failure, sizing caps, and forming a crown that slopes correctly to shed water. We stock the professional brands the chimney trade uses: Gelco and Famco for caps, DuraFlex for flexible liner systems when a failed crown has let water into the flue, HeatShield for resurfacing a damaged liner, Olympia Chimney and Copperfield for the components that round out the job.
That stock matters on a crown job. It means we’re not guessing at what’s available or sending you to a big-box store for a cap that doesn’t fit. It also means if the inspection turns up a damaged flue liner, we can resurface it with HeatShield instead of going straight to a full reliner. HeatShield is a trained-applicator product, and it restores a deteriorated liner without the cost of a full replacement. That’s the kind of option a generalist cleaner simply can’t offer.
Our work across Aurora covers the full chimney: sweep, inspection, and repair from one company, so a crown assessment doesn’t turn into three separate contractors. Clarity from the first call to the final invoice is the point.
Safety Note: What to Check and What to Leave to a Pro
The top of a chimney is a roof-level job, and it’s one of the genuinely risky parts of the trade. A wet, steep-pitched roof in Aurora after a rainstorm is not a place to lean out from a ladder with a bag of mortar. A loose cap, a cracked crown, or spalling brick at the top can fail under a hand or a foot. If you look up and see a damaged cap or a crown with visible cracks, don’t climb up to check it. Get a trained professional to assess it from the roof.
There are things you can safely do from the ground. Note whether the cap is still sitting square and whether the mesh is intact. Look for a crown that’s crumbled at the edge or a chimney that’s staining below the top, which can point to a leak. And watch for water stains on the ceiling near the chimney. All of those are reasons to call rather than reasons to grab a ladder.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Aurora?
A standard single-flue cap installed in Aurora is typically $150 to $275 in 2026, and a multi-flue cap runs $350 to $1,100 depending on the flue count and footprint. A custom-fabricated cap for a non-standard flue lands around $275 to $400. Call (855) 368-2029 for an exact quote. Estimates are free.
Is it cheaper to repair or replace a chimney crown?
Repair is cheaper when the damage is cosmetic: $400 to $700 for a sealed crown versus $700 to $1,200 for a rebuild. Once the crown is spalling and broken away, though, a repair won’t hold, and a rebuild is the right call. A quick assessment tells you which side you’re on. Call (855) 368-2029.
How much does crown repair cost in Aurora?
Crown repair in Aurora typically runs $400 to $700, and a crown rebuild with new flashing can reach $1,000 to $1,600. The lower end covers crack chasing and a flexible crown coating that moves with the masonry as it expands and contracts. The upper end covers a full removal and new pour. Call (855) 368-2029 for a free estimate.
Do I need a chimney cap if I have a crown?
Yes. The crown sheds water off the top of the chimney, but it doesn’t keep rain, birds, or squirrels out of the flue. A cap sits above the flue opening and does that job. A cap typically adds $150 to $275 when installed with a crown job. Call (855) 368-2029.
Can you come today?
Same-day service is often possible. We answer 24/7 and dispatch Sunday through Friday, 7am to 7pm. A call outside dispatch hours is booked into the next opening. Call (855) 368-2029 and we’ll find the earliest slot.
Why does a cap and crown matter so much in Aurora?
Aurora’s hail, freeze-thaw swings, and elevation UV are hard on chimney tops. A failed crown lets water into the flue, and water is what damages liners and masonry. A properly fitted Gelco or Famco cap protects the crown between service visits and cuts down on how often you have to do the job again.
Book a Free Cap & Crown Estimate
If your chimney cap is loose, your crown is cracked, or you’re not sure which one you’re looking at, get an honest read before you spend. Morningstar Chimney Sweep handles the sweep, the inspection, and the repair from one company, using professional-grade caps and crown materials from Gelco, Famco, and the rest of the trade brands we stock. The estimate is free, and the written estimate sets the final price. Call (855) 368-2029 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Clarity from the first call to the final invoice.
Pricing reflects the Aurora market as of 2026. Morningstar Chimney Sweep offers free estimates. Call (855) 368-2029.
Written by the team at Morningstar Chimney Sweep.
What Our Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Brian Ziegler"Fair price, competent work. The guy wasn't especially chatty and I had to ask twice to get a real explanation of what he'd done. Not a dealbreaker, just noting it."
- Dale Kowalski"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Yusuf Karam