Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Aurora, CO
A chimney inspection in Aurora starts with one question most homeowners never ask: is the problem inside the flue, or is it the ground underneath the chimney? That second possibility is real here, because much of Aurora sits on expansive bentonite clay that shifts with the seasons. We’re Morningstar Chimney Sweep, a chimney-only company. We inspect before we sweep, show you what we found, and handle the repair ourselves rather than handing you off. Our technicians have up to 8 years of experience, and they know the difference between a flue full of creosote and a flue that pulled apart at the joints. Call (855) 368-2029 to book.
Why Aurora Homes Are Different
Aurora’s housing stock splits sharply, and the split changes how we work. Near Original Aurora and Hoffman Heights you’ll find 1950s through 1970s ranch homes and brick two-stories, many still carrying their original clay-tile liners. Out toward Southlands and the eastern plains edge, the builds are 1990s and 2000s tract subdivisions with factory-built metal flue fireplaces, which get inspected and serviced on a completely different schedule than masonry. Same city, two trades in one.
The climate adds its own wear. Aurora’s high-desert Front Range weather brings dry air, intense sun, wide day-to-night temperature swings, and spring and fall wind events. Masonry crowns and mortar joints spall and crack faster here than in wetter parts of the country, which means annual inspections catch deterioration long before a homeowner would notice it from the ground. Creosote behaves differently too: in this dry air it goes brittle and glaze-cracks rather than staying soft.
Then there’s the soil. Expansive bentonite clay runs across central and western Aurora, and movement in that clay tilts chimneys and separates flue joints on brick ranches that otherwise look sound. On a lot of Aurora reports, settlement is the real finding, not creosote. Our technicians have up to 8 years of experience reading exactly that kind of evidence.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Aurora Services
Most Aurora homeowners call us for one of two reasons: the chimney needs cleaning before the heating season, or something on the report needs fixing. Both start with the same visit.
Chimney Sweep in Aurora
Sweeping an Aurora chimney means removing creosote from the flue, the firebox, and the smoke chamber, then checking that the damper opens and closes cleanly. On mid-century masonry fireplaces around Hoffman Heights, that often means working around a cracked clay-tile liner the homeowner didn’t know about. On the metal flue fireplaces in the newer subdivisions, it means confirming the cap is intact and the flue sections haven’t pulled apart. We inspect before we sweep, so you get an account of condition as well as a clean flue. Book a chimney sweep and we’ll handle it on the same visit.

Chimney Repair in Aurora
Repair in Aurora is where the soil shows up. Tilted chimneys, separated flue joints, and cracked crowns are common findings on brick ranches, and the fix is usually masonry work rather than a sweep. We use professional-grade materials: DuraFlex flexible liners when a flue needs relining, HeatShield resurfacing when a deteriorated liner can be restored instead of replaced, and caps from Gelco and Famco to keep weather out afterward. That’s a different approach from a generalist who patches and leaves. When you need chimney repair, the written estimate sets the price before any work starts.

Chimney Inspection in Aurora

A chimney inspection in Aurora tells you what condition your flue is actually in, and here that means two very different checklists depending on the house. A 1960s brick ranch near Original Aurora needs its clay-tile liner examined for cracks and its chimney checked for settlement, because bentonite clay movement across central Aurora tilts chimneys and pulls flue joints apart on homes that look fine from the street. A 2000s build near Southlands needs its factory-built metal flue inspected for joint separation and a cap that’s taken years of Front Range wind. Our Chimney Inspection produces a documented condition report you can hand to an insurer, a real-estate agent, or a fire marshal.
Fireplace Inspection
Signs you need it
Smoke rolling into the room instead of up the flue, a damper that sticks, or a firebox wall with visible cracks all point to a fireplace inspection before the next fire.
What it costs in Aurora
A standard inspection runs $125 to $250, and level 2 inspections with photos and a condition report run $200 to $450.
How we do it
We check the firebox, damper, smoke chamber, and the first sections of flue, document findings with photos, and explain what’s urgent and what can safely wait.
Chimney Inspection Services
Signs you need it
A home purchase, a new insurance policy, or a first fire in a chimney you haven’t used in years are the usual triggers for a full inspection.
What it costs in Aurora
Standard inspection pricing in Aurora is $125 to $250, with photo-documented level 2 inspections at $200 to $450.
How we do it
A technician examines the full flue path, checks the cap and crown, notes any settlement at the chimney base, and leaves you a written report of condition.
Chimney Flue Inspection
Signs you need it
Glaze-cracked creosote, an odor when the chimney is damp, or a flue that’s never been examined since the liner was installed call for a flue inspection.
What it costs in Aurora
Flue inspection, including a camera look at the liner, sits within the $200 to $450 level 2 range in Aurora.
How we do it
We run a camera down the flue, look for cracked tiles, separated joints, and glaze, and show you the footage rather than describing it after the fact.
Level 2 Chimney Inspection
Signs you need it
Buying or selling a house, changing fuel type, or an event like a chimney fire or earthquake makes a level 2 inspection the appropriate scope.
What it costs in Aurora
A level 2 inspection in Aurora typically costs $200 to $450, and the written report is included.
How we do it
We inspect every accessible part of the chimney and flue with camera documentation, check clearances, and issue a condition report you can present to third parties.
What Chimney Inspection Costs in Aurora
| Item | Typical range in Aurora |
|---|---|
| Standard chimney inspection | $125 – $250 |
| Level 2 inspection with camera and photo report | $200 – $450 |
| Inspection combined with a sweep on the same visit | $125 – $250 for the inspection portion, quoted together |
Do I need a level 2 inspection or a standard one?
If you’re buying or selling a home in Aurora, changing fuels, or your chimney has had a fire, you need a level 2 with camera documentation. A standard inspection covers routine annual checks. Call (855) 368-2029 for an exact quote. Estimates are free.
How often should an Aurora chimney be inspected?
Once a year is the general best practice, and it matters more here because bentonite soil movement and dry Front Range weather both create deterioration you can’t see from outside. A chimney that’s swept regularly still needs an annual look at the liner and crown. Call us to book.
Brands We Service in Aurora
Our repair and installation work uses materials from the professional chimney supply chain: DuraFlex flexible liner systems, HeatShield flue resurfacing, and caps and covers from Gelco, Famco, and Olympia Chimney. These aren’t hardware-store substitutes. Turnaround on a specialty part is usually a few days, and we’ll tell you up front. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Aurora, CO
| Service | Typical range in Aurora |
|---|---|
| Standard chimney inspection | $125 – $250 |
| Level 2 inspection with photo report | $200 – $450 |
| Camera flue inspection | $200 – $450 |
| Chimney sweep | $125 – $250 |
| Sweep and inspection combined | $200 – $450 |
| Chimney cap installation | $150 – $400 |
| Crown repair | $300 – $800 |
| HeatShield flue resurfacing | $800 – $2,000 |
| DuraFlex liner installation | $1,800 – $4,500 |
| Chimney rebuild (upper section) | $2,500 – $7,000 |
What pushes price up in Aurora is usually what the report finds: a separated flue joint from soil settlement means masonry work, not a sweep, and a full reline costs far more than HeatShield resurfacing on a liner that can still be restored. Nothing is recommended without camera evidence you can see. The written estimate you get before work starts is the price you pay.
Neighborhoods We Serve in Aurora
We cover Aurora from the older brick streets near Original Aurora and Hoffman Heights out through the newer subdivisions toward Southlands and the eastern plains edge, including the central neighborhoods sitting on bentonite clay. Older masonry chimneys and factory-built metal flues are both routine for us, and we quote each on what the inspection actually shows. Booked visits are dispatched Sunday through Friday, 7am to 7pm, and we’re closed Saturday.
- Original Aurora
- Hoffman Heights
- Southlands
- Central Aurora
Service Area – Cities Near Aurora
Aurora sits close enough to its neighbors that our coverage runs past the city line. We also book chimney work in Four Square Mile, CO, Holly Hills, CO, Acres Green, CO, and Meridian, CO. The housing stock changes as you cross those lines, but the approach doesn’t: we inspect before we sweep, document what we find, and quote the repair before we touch it. Call (855) 368-2029 to book.
Serving Aurora, CO – Our Local Coverage Area
We serve Aurora and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Aurora
Yes. We cover the full city, from Original Aurora and Hoffman Heights to Southlands and the eastern plains edge. Booked visits are dispatched Sunday through Friday, 7am to 7pm, and we’re closed Saturday. Call (855) 368-2029 to schedule.
Some chimney repair work does require a permit, and the rules depend on the scope. We’ll tell you during the estimate whether your job falls into that category so you can check with the city building department before scheduling. Estimates are free.
We book visits into the next open slot, dispatched Sunday through Friday, 7am to 7pm. We’re closed Saturday. Fall is our busiest stretch as homeowners prepare for heating season, so booking ahead helps. Call (855) 368-2029. We answer 24/7.
Ready to know what’s actually going on with your chimney? Call Morningstar Chimney Sweep at (855) 368-2029 for a free estimate. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. One company handles the sweep, the inspection, and the repair, with a documented report and a written price before anything starts.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Aurora Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Brian Ziegler"Fair price, competent work. The guy wasn't especially chatty and I had to ask twice to get a real explanation of what he'd done. Not a dealbreaker, just noting it."
- Dale Kowalski"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Yusuf Karam