Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Aurora, CO
Morningstar Chimney Sweep provides independent Gelco service across Aurora, from full Level 2 inspections to damper repair and firebox work on Gelco fireplaces and inserts. What makes Gelco work in Aurora different is the ground underneath: expansive bentonite clay across central and western neighborhoods tips otherwise sound brick chimneys and pulls flue joints apart, so many calls here start with a level-and-joint check before anyone sweeps. We know these units and we’re not affiliated with Gelco. Call (855) 368-2029 to set up a visit.
Why Aurora Residents Choose Us for Gelco Service
Gelco fireplaces and inserts show up in Aurora homes from Original Aurora out to the eastern plains edge, and we work on them often enough to recognize their habits without guesswork. The damper hardware on a Gelco wood-burning unit has its own feel and its own wear pattern. The firebox dimensions matter when a replacement panel has to sit flush. A generalist sweep sees a firebox and a flue; we see the specific points where Gelco units tend to fail.
We’re an independent Gelco service provider. That means no manufacturer authorization, no sponsorship, no endorsement – just trained hands, professional-grade parts, and a written account of what we found. Our technicians have up to 8 years of experience with wood-burning and gas chimney systems, which covers the range Aurora throws at us: original masonry flues in mid-century homes and factory-built metal flues in the newer suburban builds.
Scheduling is straightforward. You tell us what the fireplace is doing, we book the visit, and we inspect before we sweep. One company handles the sweep, the inspection, and the repair – no handoffs, no second contractor to coordinate.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Aurora
Most Gelco calls in Aurora land in one of five patterns. Each one has a local reason behind it.
- Warped damper blades and bent pivot pins on Gelco 300 and 400 Series fireplaces. Years of hot burns wear the pivot point, and the blade follows. The damper then sticks open (bleeding conditioned air all winter) or sticks shut (smoke drifting into the room on every startup). Aurora’s big day-night temperature swings add stress cycles to masonry around the damper frame, so we check the surrounding brick at the same time.
- Cracked refractory brick and firebox floors in Gelco wood-burning units. The Front Range swing from a warm afternoon to a hard freeze overnight works on firebox masonry and on the units themselves. Hairline cracks that look cosmetic in summer open up under a real fire.
- Rust-through on steel fireboxes and flue collars. This is an older-Aurora pattern. A leaky crown or flashing lets snowmelt sit against the metal, and the metal loses. We find the water source before we sell a repair, so the fix holds.
- Failed flue-collar gaskets on Gelco inserts. A gasket that gives up lets creosote seep behind the surround, where nobody sees it. This is exactly what an annual Level 2 inspection catches before a sweep ever starts.
- Settlement-related flue joint separation. Aurora’s bentonite clay moves, and brick chimneys that were plumb when they were built can be leaning now. Separated joints change how a flue draws and how creosote builds.
Gelco Service in Aurora: What Local Conditions Mean for Your Equipment
The bentonite clay under much of central and western Aurora is the part most chimney companies skip. Clay soils swell when they take on water and shrink when they dry, and the Front Range gives them plenty of both. On original mid-century brick homes around Hoffman Heights and Original Aurora, that slow movement routinely tilts chimneys that are otherwise in good shape and separates flue joints that were tight when they were laid. A homeowner sees a sound 1960s brick ranch and books a routine cleaning. The technician finds a leaning stack and joints that need attention before a brush should go anywhere near them.
That’s why Gelco service calls in Aurora often open with a level-and-joint check. Sweeping a settled flue is the wrong order of operations. It’s also why a report from us here reads differently than it would in a town on stable soils: settlement, not creosote, is sometimes the actual problem. Our Gelco work starts with what the chimney is doing physically, then moves to what’s inside it.
Gelco Models & Products We Service in Aurora
We handle the Gelco fireplace and insert types Aurora homeowners actually have: wood-burning fireplaces, wood-burning fireplace inserts, and gas inserts. A Gelco cap and cover install is common on these homes too, and we treat the cap as part of the whole system rather than an accessory. A cap that’s missing or loose is how water gets in, and water is what rusts a steel firebox or spalls a crown.
On parts, we use OEM Gelco dampers, firebox panels, and gaskets when they’re available, because fit and clearances on these units aren’t negotiable. For exterior work like caps and flashing, quality aftermarket components are fine and often the smarter buy. If a firebox is cracked through or a damper assembly is no longer available, we’ll tell you plainly that replacement beats patching. We’re not a Gelco dealer and we’re not authorized by the manufacturer. We’re an independent shop that knows the equipment.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Aurora
Every Gelco job in Aurora is priced per job by a written estimate. Nothing is recommended before the inspection and nothing is billed on a hunch. Here’s what drives the number:
- Whether the visit is a cleaning, a Level 2 inspection, or both
- Damper rebuild work – pivot pins, blades, or a full assembly
- Firebox repair scope, including refractory panels or floor repair
- Whether settlement is involved, since a tilted flue or separated joints change the job
- Cap and cover replacement, and whether flashing needs attention
The estimate is free. You get the findings, the photos behind them, and a written price before any repair starts. Insured and bonded, and the price in the estimate is the price. Call (855) 368-2029 for an exact quote.
Serving Aurora, CO – Our Local Coverage Area
We serve Aurora and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Aurora
A Gelco fireplace in Aurora generally needs a Level 2 inspection when anything about the chimney has changed – a new home purchase, a liner question, a settlement concern, or an insert that smells. A Level 1 is the routine annual look. Because Aurora’s clay soils can shift a chimney, we lean toward the Level 2 whenever settlement is even a possibility. Call (855) 368-2029 and we’ll tell you which one fits your situation.
A sticking Gelco damper is usually a bent pivot pin or a warped blade, not dirt. The pivot wears from repeated hot burns, the blade follows it out of plane, and the seal goes. On Aurora’s 300 and 400 Series fireplaces this shows up alongside firebox-floor cracks often enough that we check both together. A damper rebuild restores the seal when the assembly is still serviceable. Call (855) 368-2029 to book an inspection.
A hairline crack in a Gelco firebox floor or refractory panel can often be repaired; a crack that goes through the firebox wall usually can’t be patched safely. The difference matters, and it’s why we inspect with photos before recommending anything. Aurora’s temperature swings make these cracks work open over a season, so a small one is worth addressing early. Call (855) 368-2029 for an honest read on yours.
A creosote smell from a Gelco insert usually means creosote has seeped behind the surround, often through a failed flue-collar gasket. That’s not a smell a surface cleaning fixes. It’s a Level 2 inspection finding, and it’s why we inspect before we sweep on inserts. Warm days after a cold snap can make the odor worse. Call (855) 368-2029 to get it checked.
Yes, in two ways. The dry Front Range air, intense sun, and spring and fall wind events spall masonry crowns and mortar joints faster than wetter climates do. And the bentonite clay under central and western Aurora moves enough to tilt chimneys and separate flue joints. Creosote also gets brittle and glaze-cracked differently here than in humid metros. Together, that’s a strong argument for annual inspection rather than waiting. Call (855) 368-2029 for a free estimate.
Service Areas Near Aurora
We cover Gelco service across Aurora and the surrounding communities, including Four Square Mile, Holly Hills, Meridian, Sierra Ridge, and Acres Green. If your home sits in one of these areas and you have a Gelco fireplace or insert, the same inspection-first approach applies. Reach out and we’ll confirm coverage for your address.
Book Your Gelco Service in Aurora Today
If your Gelco damper won’t seal, your firebox has a crack you’re not sure about, or it’s simply been a while since anyone looked at the flue, book a visit with Morningstar Chimney Sweep. We inspect before we sweep, document what we find, and quote the repair in writing. Call (855) 368-2029 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Morningstar Chimney Sweep.