Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Why Aurora Homeowners Choose Gelco Chimney Cleaning
We provide independent Gelco chimney cleaning, repair and service in Aurora, and we know the brand from the inside out – dampers, fireboxes, baffles and caps. What makes our Gelco work different is that we diagnose the unit itself before we ever sweep the flue, so you get a real report on your Gelco fireplace instead of a generic once-over. Our technicians have up to 8 years of experience with Gelco wood and gas fireplaces, and we cover them right here in Aurora.
One thing to say plainly up front: we are an independent Gelco service provider. We’re not affiliated with or authorized by Gelco, and we don’t sell or claim to be a dealer for their products. What we do is service, repair and install Gelco equipment using quality parts that fit it. That independence is a good thing for you – we answer to the person in front of us, not to a manufacturer’s sales sheet.
Call (855) 368-2029 for a free estimate on Gelco service in Aurora. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Morningstar Chimney Sweep for Your Gelco Chimney Cleaning?
Gelco’s wood and gas fireplace lines show up across Aurora’s older and mid-century housing stock, and the fireplaces that have been in those homes for years develop familiar habits: dampers that stiffen, gaskets that harden, baffles that bend under heat. Our technicians have handled these units often enough to know which symptoms point to the damper, which to the firebox, and which are just a flue that needs a sweep. That’s the familiarity you’re hiring.
We work with quality parts that fit Gelco equipment. That means dampers, gaskets, baffles and caps chosen to match the unit in your home, not whatever happens to be on a hardware-store shelf. When we source a replacement, we match the fit and function first, because a part that “works” but doesn’t seat right will fail you again within a season or two.
Warranty-safe practice matters with any brand. We service Gelco fireplaces in a way that respects the manufacturer’s documentation where you have it, and we tell you honestly when a repair might affect coverage so you can make that call with full information. No pressure, no guessing. Just a clear account of what we found and what it means.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Fix in Aurora
Aurora’s dry, wind-scoured Front Range climate and its wide day-night temperature swings put Gelco fireplaces through a particular kind of wear. These are the problems we run into most.
- Warped or cracked fireboxes and baffles. Painted and plated steel fireboxes and baffles can warp and crack under repeated high-heat burns. When the baffle warps, combustion gases start to bypass it instead of rising cleanly through the flue. That’s a safety issue and a draft issue at the same time, so we check the baffle on every Gelco visit.
- Seized or sagging dampers. Damper blades and pivot pins seize up or sag out of alignment over years of heating. The result is a flue that never fully opens (smoky burns) or never fully closes (heat and conditioned air escaping up the chimney). We see this a lot in older Aurora homes where the fireplace has sat unused for stretches.
- Leaking glass door gaskets and rope seals. Glass door gaskets and rope seals harden with age and heat. Once they harden, they leak, and a leaking door makes a fire hard to control and pushes smoke into the room. This is one of the most common causes of “my Gelco insert smokes” that we hear in Aurora.
- Corroded or loose top-mounted caps and spark screens. Top-mounted caps and spark screens corrode or work loose over time. When a cap lifts or rusts through, water and birds find their way into the flue. Aurora’s spring and fall wind events make a loose cap worse, and we check the cap seating on every service call.
- Creosote that goes brittle instead of gooey. In Aurora’s dry air, creosote in the flue tends to get brittle and glaze-cracked rather than staying sticky. That changes how it has to be swept and makes it easy to miss, since it can look like a thin hard shell instead of the thick buildup homeowners expect. We know how to clear it without damaging the flue.
Here’s the information gain you won’t get from a generic brand page: many of these problems start on the unit, not in the flue. A smoky fire in a Gelco insert is often a door gasket issue or a damper that isn’t opening fully, not a dirty flue. A generic sweep that only brushes the chimney can leave the real problem untouched. That’s exactly how you end up paying for a sweep and still getting smoke in the room.
Gelco Parts & Our Repair-vs-Replace Approach
Choosing the right part for a Gelco unit is where a lot of repairs go wrong. For Gelco fireplaces, exact-fit aftermarket dampers, gaskets, baffles and caps are the right call when the firebox and chimney structure are sound. They match the unit and do the job without pretending to be something they aren’t. We don’t stock OEM or genuine Gelco parts and we don’t describe our work that way – we use quality parts that fit, fitted properly.
Then there’s the harder question: repair or replace. When a firebox is badly warped or a refractory panel is cracked beyond a safe match, an honest pro will tell you so and recommend replacement or conversion rather than a patch that fails next winter. We’d rather have that conversation with you now than have your fireplace let you down mid-season. If the structure is sound and the part is the problem, repair makes sense and we’ll say so.
Not sure which side of that line your Gelco unit is on? Call (855) 368-2029 and we’ll walk through it with you before you commit to anything.
Our Gelco Service Process – Step by Step
- 1
Diagnosis. We start with the unit itself. We check the damper’s full range of motion, the firebox and baffle for warping and cracking, the glass door gasket and rope seal, and the cap and spark screen. Then we look at the flue. Before we sweep, we know what we’re dealing with.
- 2
Repair or install. If a damper is seized or sagging, we free or replace the assembly. If a gasket has hardened, we fit a new one so the door seals. If the cap has corroded or lifted, we replace it. We use parts that fit your Gelco unit and we explain each choice as we go.
- 3
Test. Once the repair is in place, we confirm draft is restored, check that the damper opens and closes through its full range, and sweep the flue if it needs it. You should leave with a fireplace that behaves the way it’s supposed to.
- 4
Documentation and warranty. You get a clear account of what we found, what we did, and what, if anything, still needs attention – the kind of condition report you can hand to an insurer, a real-estate agent, or keep for your own records. We also explain how the work interacts with your Gelco warranty so there are no surprises later.
See the difference
Before
After
Before
After
Before
AfterGelco Products We Service & Install in Aurora
We service and install the kinds of Gelco products Aurora homeowners actually own: Gelco wood-burning fireplace inserts, Gelco factory-built wood fireplaces, Gelco gas fireplace inserts, and Gelco fireplace glass door and screen assemblies. Each one has its own wear points, and each one gets diagnosed on its own terms rather than being treated as a generic chimney.
For a wood insert, that means the firebox, baffle, damper and door seal. For a factory-built wood fireplace, it’s the same unit-level checks plus a close look at how the flue connects. For a gas insert, it means the surrounding assembly, the seal, and how the unit vents after sitting idle. For glass doors and screens, it’s the gaskets and hardware that keep the seal tight. We don’t publish model families or series, because your specific unit is what matters, and we look at yours.
We Also Service These Brands
Gelco work is a big part of what we do in Aurora, but it isn’t the only brand we handle. We also service and install DuraFlex flexible liner systems and HeatShield flue resurfacing, along with the other professional chimney brands we work with. That breadth means a Gelco repair doesn’t become a dead end if the job turns out to need a liner or a resurfaced flue – one company handles the sweep, the inspection and the repair, with no handoffs.
FAQs – Gelco Chimney Cleaning Service in Aurora
No. We are an independent Gelco service provider, not affiliated with or authorized by Gelco, and not a Gelco dealer. We service, repair and install Gelco equipment using quality parts that fit it, and we answer to you rather than to a manufacturer. Call (855) 368-2029 for a free estimate.
Yes. We use exact-fit aftermarket dampers, gaskets, baffles and caps chosen to match your specific Gelco unit, not generic hardware-store substitutes. We match the fit and function first, because a part that doesn’t seat right fails again within a season. Call (855) 368-2029 and we’ll talk through what your unit needs.
Most Gelco service calls run a couple of hours, depending on whether we’re doing a sweep only or a repair such as a damper replacement or gasket fit. A straightforward sweep and inspection is quicker; a repair that involves freeing a seized damper or replacing a cap takes longer. We’ll give you a realistic window when we book. Call (855) 368-2029 to set up your visit.
We cover Gelco wood-burning fireplace inserts, Gelco factory-built wood fireplaces, Gelco gas fireplace inserts, and Gelco fireplace glass door and screen assemblies. That includes damper repair, firebox repair and cap replacement. Call (855) 368-2029 to confirm your specific unit is one we service.
Not if the work is done properly, and we service in a way that respects the manufacturer’s documentation where you have it. We’ll tell you honestly if a repair might affect coverage so you can decide with full information. Call (855) 368-2029 and we’ll walk through your situation.
It depends on the job. A sweep alone sits at one end of the range; a repair like a damper replacement or cap fit adds to it, and we set the price per job with a written estimate before we start. The estimate is free, so you’ll know the number before any work begins. Call (855) 368-2029 for an exact quote – estimates are free, and we answer 24/7.
The damper pivot has likely seized or the blade has sagged out of alignment, so the handle travels but the blade doesn’t fully open. A qualified local pro frees or replaces the damper assembly and confirms the flue opens through its full range. Call (855) 368-2029 for a free estimate.
It depends on how bad the crack is. A minor issue can sometimes be repaired with an exact-fit baffle, but a badly warped firebox or cracked refractory that can’t be safely matched usually means replacement or conversion is the honest call. We’ll tell you which side you’re on after we look. Call (855) 368-2029.
A gas insert that’s sat idle usually has a hardened door gasket, dust and debris in the assembly, or a venting issue that showed up while it was off. Gelco gas inserts need a check of the seal and the surrounding assembly before you rely on them again. Call (855) 368-2029 and we’ll diagnose it.
Often yes. Gelco top-mounted caps and spark screens are sized to the unit, and a generic cap may not seat correctly or protect the flue the way it should. A loose or corroded cap lets water and birds in, so the right fit matters. Call (855) 368-2029 for a free estimate on a cap that fits.
Look for a hard, brittle shell inside the flue rather than sticky buildup, which is common in Aurora’s dry air and easy to miss. If your fire burns poorly, smokes into the room, or you haven’t had it swept in a while, it’s worth a look. Call (855) 368-2029 and we’ll check it and show you what we find.
Book Your Gelco Service in Aurora, CO
Whether your Gelco fireplace needs a sweep, a damper repair, a new cap, or an honest answer about repair versus replace, we’re ready to help. One company handles the sweep, the inspection and the repair, with a clear account of what we found at every step. Call (855) 368-2029 for a free estimate on Gelco chimney service in Aurora. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Morningstar Chimney Sweep.