Chimney Inspection in Aurora, CO | Morningstar Chimney Sweep

Chimney Inspection in Aurora - Flat-Price Sweep, Findings in Writing

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

Flat price quoted before we book

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Inspection for Aurora Homeowners

A chimney that looks fine from the driveway can hide a cracked liner, a blocked flue, or a cap that came loose over a windy Aurora spring. You can’t see any of that from the ground, and guesses don’t hold up when an insurer or a buyer asks for proof. That’s the problem an inspection solves: a trained set of eyes and a camera look at the parts of your chimney no one ever sees, and you get a written account of what’s actually there. Our technicians have up to 8 years of experience, we inspect before we sweep, and we tell you plainly what needs attention now and what can safely wait. Same-day scheduling is often available in Aurora. Call (855) 368-2029. We answer 24/7.

Professional chimney sweep performing a thorough fireplace and chimney inspection in Aurora, CO

Call (855) 368-2029

We’re a chimney specialist, not a general handyman outfit. Morningstar Chimney Sweep handles the inspection, the sweep, and the repair in one visit so you’re not relaying findings between contractors.

Fireplace Inspection

Fireplace Inspection is the close look at the firebox, damper, smoke chamber, and the firebox-to-flue connection, and it’s the right call whenever you’ve moved into a new place, changed how you burn, or noticed smoke where it shouldn’t be. It matters most for open masonry fireplaces and older inserts, where cracks and gaps in the firebox joints can let heat and gases travel into the wall structure instead of up the flue. We check the firebox brick and mortar, test the damper, and look at how the smoke chamber funnels toward the flue. A fireplace inspection in Aurora typically runs $99 to $250 depending on how many fireplaces and how much access we have, and the written estimate you get first sets the final price.

Firebox and Damper Check

We test the damper through its full range to see whether it opens cleanly and closes tight. A damper that sticks open sends heated room air up the chimney all winter and lets cold air back down when the fireplace is idle. Hairline cracks in the firebox brick and crumbling mortar joints are noted with their location so you can see them yourself on the camera.

Smoke Chamber and Draft

The smoke chamber is the sloped space above the damper, and rough or sooted walls there are a common cause of smoky fires. We note its condition and whether the shape is guiding smoke toward the flue or letting it roll back into the room. If the fireplace smokes with the damper open, this is usually where the answer shows up.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Inspection Services

Chimney Inspection Services cover the whole chimney assembly, not just the firebox: exterior masonry, crown, cap, flashing, flue liner, and the parts of the system between the firebox and the sky. You need them whenever you’re buying or selling a home, whenever an insurer asks for documentation, and on a routine schedule if you burn wood regularly. We produce a documented condition report you can hand to an insurer, a real-estate agent, or a local fire marshal, with photos of anything flagged. Chimney inspection services in Aurora typically run $99 to $350 depending on the level of inspection and whether a camera is needed. Estimates are free.

Masonry, Crown, and Flashing

Aurora’s freeze-thaw swings are hard on masonry. Water gets into a hairline crack, freezes overnight, and widens it a little more each season. We look at the crown, the mortar joints, and the flashing where the chimney meets the roof, because that’s where most water intrusion starts.

Caps and Weather Protection

A missing or damaged cap lets rain straight down the flue and invites birds and squirrels to nest inside it. We check the cap and the spark arrestor screen, and where a replacement is needed we install from the Gelco and Famco product lines we carry. A proper cap is one of the cheapest ways to reduce how often the chimney needs repair.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 368-2029

Chimney Flue Inspection

Chimney Flue Inspection is the focused look up the flue itself, the vertical channel that carries smoke and gases out of the house. It’s what you want if you’ve had a chimney fire, if you’re switching from a wood fireplace to a gas appliance or insert, or if you’ve never had the flue looked at since you moved in. We check the liner for cracks, gaps, spalling, and correct sizing, and we confirm that the flue serves only the appliance it’s meant to serve. A flue inspection in Aurora typically costs $99 to $250, and the written estimate confirms the figure before we start work.

Liner Condition and Integrity

The liner is what keeps heat and gases away from the wood framing that often sits close to the chimney. Cracks, missing mortar joints, and gaps at the flue tile connections are all noted. Where the liner is deteriorated but still structurally sound, HeatShield resurfacing can restore it without a full reline, and that’s a repair method most generalist cleaners can’t offer.

Flue Sizing and Appliance Match

A flue that’s too large for the appliance cools the smoke before it exits, and a flue that’s too small chokes it. Both cause draft problems and faster creosote buildup. We measure the flue and confirm it matches what’s venting into it, which matters most after an insert or stove has been added.

Chimney Fire

Chimney Fire is a fire burning inside the flue itself, usually fed by accumulated creosote, and even a small one can crack a liner or damage mortar in ways you can’t see from the hearth. You need a professional inspection after any chimney fire, even one that burned out on its own or was put out quickly. We look for the specific damage a fire leaves behind: cracked or spalled flue tiles, warped dampers, discolored or distorted caps, and heat damage to the masonry. A post-fire inspection in Aurora typically runs $150 to $350 and may include a camera inspection of the full flue. If a fire has happened, don’t burn again until the flue has been checked, because a compromised liner is a serious hazard.

What a Chimney Fire Leaves Behind

The heat inside a flue fire can exceed what the tile and mortar were built to handle, and the damage often shows up as a network of cracks rather than anything dramatic. Those cracks let heat reach framing and let carbon monoxide escape into the home. We document what we find with photos so you can see the damage for yourself.

Creosote and Future Risk

Creosote builds up in stages: soft and flaky first, then crusty, then glazed and hard, and the glazed stage is the one that fuels a hot chimney fire. A regular sweep keeps buildup from reaching that point. We assess the creosote level as part of every inspection so you know where you stand.

Level 2 Chimney Inspection

Level 2 Chimney Inspection is the standard inspection for a home sale or purchase, an appliance change, or after a chimney fire or an earthquake, and it goes further than a basic visual check by adding a camera look at the accessible parts of the flue and attic. It’s the level real-estate agents and insurers most often ask for, because it produces a documented report rather than a verbal summary. We inspect the accessible interior and exterior of the chimney, the flue via camera, the attic and crawlspace where accessible, and the appliance connections. A Level 2 inspection in Aurora typically runs $200 to $350 depending on access and how many flues the chimney has. The written estimate sets the final price.

When a Level 2 Is the Right Level

A Level 2 is what you want whenever the chimney’s condition or use is changing: a new home, a new insert, a new appliance, or a return to service after a long idle period. It’s also the level insurers tend to request because it documents the full flue, not just what’s visible from the hearth. We’ll tell you plainly if a Level 1 is enough for your situation.

The Condition Report You Receive

Our inspection produces a written condition report with photos of anything flagged, plus notes on what needs attention now and what can wait. You can present it to an insurer, a real-estate agent, or a fire marshal without further follow-up. It’s the same account we work from if you decide to book repairs.

Chimney Leak

Chimney Leak is water getting into the chimney system, and it usually shows up as a stained ceiling near the chimney, damp masonry, rust on the firebox, or a musty smell when the fireplace hasn’t been used. It’s the right call the moment you notice any of those, because water damage compounds: freeze-thaw cycles in Aurora turn small cracks into big ones, and a slow leak can rot framing and ruin a flue liner over a couple of seasons. We trace the source, checking the crown, flashing, cap, and masonry joints, since the leak is rarely where the stain appears. A chimney leak inspection in Aurora typically runs $150 to $400 depending on access and the repair needed, with the estimate setting the final price.

Tracking the Leak to Its Source

Water often enters at the crown or where the flashing meets the roof and travels sideways or down before it shows up inside. We check each likely entry point in sequence rather than guessing at the first one. Once the source is found, we tell you what it takes to close it.

professional chimney inspection service in Aurora, CO

Crown, Flashing, and Cap Repairs

A cracked crown, failed flashing, or missing cap are the three most common leak sources, and all three are repairable. Where a cap is needed, we install from the Gelco and Famco lines we carry. Fixing the entry point protects the liner and the framing from further damage.

Chimney Camera Inspection

Chimney Camera Inspection is a video look at the full length of the flue from the top or bottom, and it’s how you see cracks, gaps, offsets, and blockages a visual check from the fireplace simply can’t reach. We recommend it whenever the chimney has always vented poorly, after a chimney fire, and any time the liner can’t be assessed by eye. The camera also confirms whether previous repairs held up and whether a flue that looks fine at the top is sound all the way down. A camera inspection in Aurora typically runs $150 to $350 depending on access and flue length, and we include the photos in your written report so you can see exactly what we saw. Call (855) 368-2029 to book.

What the Camera Sees That Eyes Don’t

Offset flue tiles, ledge cracks at the joints, and mortar that has fallen into the flue are all invisible from the hearth. The camera catches settling, gaps where a liner has shifted, and debris that’s restricting draft. We flag each item with its location so there’s no ambiguity about what we’re describing.

How the Footage Helps You

You get photos and footage included with your report, which means you can verify each finding rather than take our word for it. That’s how we avoid recommending work you can’t confirm is needed. If something can wait, we’ll say so on the report.

Brands We Service

We use DuraFlex flexible liner systems for relining work, because it’s the industry standard for safe, code-compliant chimney liners, and we know where those liners wear, kink, and need to be checked at their connections. Morningstar also applies HeatShield, a specialist-only flue resurfacing product that restores a deteriorated liner without full replacement, and you won’t find it offered by a generalist cleaner. Both are the kind of professional-grade materials specified by certified chimney professionals rather than hardware-store substitutes.

For caps, covers, and weatherproofing we work with Gelco and Famco product lines, which means repair components come from the same professional supply chain commercial chimney contractors use. Whether you have DuraFlex, HeatShield-restored liners, or any other make, we can help. Estimates are free, and the estimate you receive up front sets the final price.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Signs You Need a Pro Right Now

  • Smoke backing into the room. A fireplace that used to draw fine and now smokes is a sign of a blockage, a partially closed damper, or a flue that’s no longer sized right for what’s venting. It won’t clear up on its own, and continuing to burn makes it worse.
  • A strong, acrid smell even when the fireplace is cold. That’s often creosote or a downdraft problem, and it can mean the flue is blocked or the cap is missing. It’s worth a look before you light another fire.
  • Water stains on the ceiling near the chimney or rust on the firebox. These point to a leak that’s already traveling through the system. Freeze-thaw cycles will keep widening the entry point until it’s fixed.
  • Cracked or missing flue tiles visible at the top. A flue is only as safe as its liner, and a damaged liner lets heat reach framing and gases enter the home. A camera inspection confirms how far the damage extends.
  • A chimney fire, even a small one. Any fire inside the flue deserves an inspection before the chimney is used again. Even a short fire can crack a liner in ways you can’t see from the hearth.

Our Process, Step by Step

  1. 1
    We talk through the symptoms first. We ask what you’ve noticed: smoke, smells, stains, how often you burn. That shapes where we look and which level of inspection makes sense for you.
  2. 2
    We inspect before we sweep. We look at the firebox, damper, smoke chamber, and any part of the flue we can reach by eye, then bring in the camera for a full-length view. We don’t sweep until we know what’s in there.
  3. 3
    We run the camera down the flue. The camera footage shows cracks, gaps, offsets, and blockages, and we capture photos for your report. This is how we document what’s actually there rather than working from a guess.
  4. 4
    We write up a condition report. You get a written account with photos of anything flagged and a plain-spoken note on what needs attention now, what can wait, and what it will cost. It’s the same report you can hand to an insurer or a real-estate agent.
  5. 5
    We book the repair if you want one. The sweep, inspection, and any repair are handled by the same company, so there’s no handoff between contractors. The estimate you received up front sets the price.

How Much Does Chimney Inspection Cost in Aurora?

Chimney inspection in Aurora typically runs $99 to $350 depending on the level of inspection and whether a camera is used. A standard visual inspection (Level 1) is usually on the lower end at $99 to $200. A Level 2 inspection with camera coverage and a written condition report runs $200 to $350, and a post-chimney-fire inspection with camera runs $150 to $350. Fireplace inspection on its own is often $99 to $250.

What affects the price: the level of inspection, the number of flues, access to the roof and attic, whether a camera is needed, and whether any repair turns up during the inspection. Chimney height and roof pitch matter too, because some roofs are safer to access than others and take more care to inspect.

How to avoid overpaying: ask up front which level of inspection you’re getting, and ask for the written condition report, not just a verbal summary. If a repair is recommended, ask for the camera footage or photos so you can see the problem yourself. You should never be talked into thousands of dollars of work you can’t verify. It’s fine to be told something can wait.

What’s included in a free estimate: our written estimate breaks down the inspection level, the sweep if you want one, and any repair work, with the final price set by that written estimate. It’s no obligation. Call (855) 368-2029 for an exact quote.

Our Service Area Near Aurora

We serve Aurora and the surrounding areas, including Four Square Mile, Holly Hills, Meridian, Sierra Ridge, Stepping Stone, Bennett, Strasburg, Todd Creek, Ponderosa Park, Castle Pines, and Acres Green. Whether you’re in an older Aurora neighborhood with masonry chimneys or a newer build out toward Bennett, we book inspections and repairs across the metro and get you a written condition report you can act on. Call (855) 368-2029 to schedule. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Serving Aurora, CO – Our Local Coverage Area

We serve Aurora and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About Chimney Inspection in Aurora

Schedule Your Chimney Inspection Service in Aurora Today

Whether you’re buying a home, renewing insurance, or just want a clear answer on what shape your chimney is in, an inspection gives you the facts in writing. Call Morningstar Chimney Sweep at (855) 368-2029. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free and there’s no obligation. We inspect before we sweep, and the written report sets out exactly what we found and what, if anything, needs attention. Estimates are free.

Written by the team at Morningstar Chimney Sweep.

Why Aurora Chooses Morningstar Chimney Sweep

We set the standard for chimney inspection in Aurora.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Aurora

Getting your chimney inspection handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney inspection needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney inspection pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Aurora Customers Say

Trusted by homeowners across Aurora and surrounding areas.

★★★★★

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

Brian Ziegler
★★★★★

"Fair price, competent work. The guy wasn't especially chatty and I had to ask twice to get a real explanation of what he'd done. Not a dealbreaker, just noting it."

Dale Kowalski
★★★★★

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

Yusuf Karam

Ready for Chimney Inspection in Aurora?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Aurora.

(855) 368-2029

Request a Free Estimate in Aurora

Tell us about your chimney inspection needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - We Answer 24/7