Chimney Company in Aurora - Flat-Price Sweep, Findings in Writing

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (855) 368-2029

Flat price quoted before we book

Work is performed by our local vetted partner.

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Chimney Company in Aurora, CO

A chimney inspection in Aurora starts with one question most homeowners never ask: is the problem inside the flue, or is it the ground underneath the chimney? That second possibility is real here, because much of Aurora sits on expansive bentonite clay that shifts with the seasons. We’re Morningstar Chimney Sweep, a chimney-only company. We inspect before we sweep, show you what we found, and handle the repair ourselves rather than handing you off. Our technicians have up to 8 years of experience, and they know the difference between a flue full of creosote and a flue that pulled apart at the joints. Call (855) 368-2029 to book.

Call (855) 368-2029

Why Aurora Homes Are Different

Aurora’s housing stock splits sharply, and the split changes how we work. Near Original Aurora and Hoffman Heights you’ll find 1950s through 1970s ranch homes and brick two-stories, many still carrying their original clay-tile liners. Out toward Southlands and the eastern plains edge, the builds are 1990s and 2000s tract subdivisions with factory-built metal flue fireplaces, which get inspected and serviced on a completely different schedule than masonry. Same city, two trades in one.

The climate adds its own wear. Aurora’s high-desert Front Range weather brings dry air, intense sun, wide day-to-night temperature swings, and spring and fall wind events. Masonry crowns and mortar joints spall and crack faster here than in wetter parts of the country, which means annual inspections catch deterioration long before a homeowner would notice it from the ground. Creosote behaves differently too: in this dry air it goes brittle and glaze-cracks rather than staying soft.

Then there’s the soil. Expansive bentonite clay runs across central and western Aurora, and movement in that clay tilts chimneys and separates flue joints on brick ranches that otherwise look sound. On a lot of Aurora reports, settlement is the real finding, not creosote. Our technicians have up to 8 years of experience reading exactly that kind of evidence.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Our Main Aurora Services

Most Aurora homeowners call us for one of two reasons: the chimney needs cleaning before the heating season, or something on the report needs fixing. Both start with the same visit.

Chimney Sweep in Aurora

Sweeping an Aurora chimney means removing creosote from the flue, the firebox, and the smoke chamber, then checking that the damper opens and closes cleanly. On mid-century masonry fireplaces around Hoffman Heights, that often means working around a cracked clay-tile liner the homeowner didn’t know about. On the metal flue fireplaces in the newer subdivisions, it means confirming the cap is intact and the flue sections haven’t pulled apart. We inspect before we sweep, so you get an account of condition as well as a clean flue. Book a chimney sweep and we’ll handle it on the same visit.

Chimney Sweep in Aurora

Chimney Repair in Aurora

Repair in Aurora is where the soil shows up. Tilted chimneys, separated flue joints, and cracked crowns are common findings on brick ranches, and the fix is usually masonry work rather than a sweep. We use professional-grade materials: DuraFlex flexible liners when a flue needs relining, HeatShield resurfacing when a deteriorated liner can be restored instead of replaced, and caps from Gelco and Famco to keep weather out afterward. That’s a different approach from a generalist who patches and leaves. When you need chimney repair, the written estimate sets the price before any work starts.

Chimney Repair in Aurora
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 368-2029

Chimney Inspection in Aurora

Chimney Inspection in Aurora

A chimney inspection in Aurora tells you what condition your flue is actually in, and here that means two very different checklists depending on the house. A 1960s brick ranch near Original Aurora needs its clay-tile liner examined for cracks and its chimney checked for settlement, because bentonite clay movement across central Aurora tilts chimneys and pulls flue joints apart on homes that look fine from the street. A 2000s build near Southlands needs its factory-built metal flue inspected for joint separation and a cap that’s taken years of Front Range wind. Our Chimney Inspection produces a documented condition report you can hand to an insurer, a real-estate agent, or a fire marshal.

Fireplace Inspection

Signs you need it

Smoke rolling into the room instead of up the flue, a damper that sticks, or a firebox wall with visible cracks all point to a fireplace inspection before the next fire.

What it costs in Aurora

A standard inspection runs $125 to $250, and level 2 inspections with photos and a condition report run $200 to $450.

How we do it

We check the firebox, damper, smoke chamber, and the first sections of flue, document findings with photos, and explain what’s urgent and what can safely wait.

Chimney Inspection Services

Signs you need it

A home purchase, a new insurance policy, or a first fire in a chimney you haven’t used in years are the usual triggers for a full inspection.

What it costs in Aurora

Standard inspection pricing in Aurora is $125 to $250, with photo-documented level 2 inspections at $200 to $450.

How we do it

A technician examines the full flue path, checks the cap and crown, notes any settlement at the chimney base, and leaves you a written report of condition.

Chimney Flue Inspection

Signs you need it

Glaze-cracked creosote, an odor when the chimney is damp, or a flue that’s never been examined since the liner was installed call for a flue inspection.

What it costs in Aurora

Flue inspection, including a camera look at the liner, sits within the $200 to $450 level 2 range in Aurora.

How we do it

We run a camera down the flue, look for cracked tiles, separated joints, and glaze, and show you the footage rather than describing it after the fact.

Level 2 Chimney Inspection

Signs you need it

Buying or selling a house, changing fuel type, or an event like a chimney fire or earthquake makes a level 2 inspection the appropriate scope.

What it costs in Aurora

A level 2 inspection in Aurora typically costs $200 to $450, and the written report is included.

How we do it

We inspect every accessible part of the chimney and flue with camera documentation, check clearances, and issue a condition report you can present to third parties.

What Chimney Inspection Costs in Aurora

Item Typical range in Aurora
Standard chimney inspection $125 – $250
Level 2 inspection with camera and photo report $200 – $450
Inspection combined with a sweep on the same visit $125 – $250 for the inspection portion, quoted together

Do I need a level 2 inspection or a standard one?

If you’re buying or selling a home in Aurora, changing fuels, or your chimney has had a fire, you need a level 2 with camera documentation. A standard inspection covers routine annual checks. Call (855) 368-2029 for an exact quote. Estimates are free.

How often should an Aurora chimney be inspected?

Once a year is the general best practice, and it matters more here because bentonite soil movement and dry Front Range weather both create deterioration you can’t see from outside. A chimney that’s swept regularly still needs an annual look at the liner and crown. Call us to book.

Brands We Service in Aurora

Our repair and installation work uses materials from the professional chimney supply chain: DuraFlex flexible liner systems, HeatShield flue resurfacing, and caps and covers from Gelco, Famco, and Olympia Chimney. These aren’t hardware-store substitutes. Turnaround on a specialty part is usually a few days, and we’ll tell you up front. See our brands for the full list.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Chimney Company in Aurora, CO

Service Typical range in Aurora
Standard chimney inspection $125 – $250
Level 2 inspection with photo report $200 – $450
Camera flue inspection $200 – $450
Chimney sweep $125 – $250
Sweep and inspection combined $200 – $450
Chimney cap installation $150 – $400
Crown repair $300 – $800
HeatShield flue resurfacing $800 – $2,000
DuraFlex liner installation $1,800 – $4,500
Chimney rebuild (upper section) $2,500 – $7,000

What pushes price up in Aurora is usually what the report finds: a separated flue joint from soil settlement means masonry work, not a sweep, and a full reline costs far more than HeatShield resurfacing on a liner that can still be restored. Nothing is recommended without camera evidence you can see. The written estimate you get before work starts is the price you pay.

Neighborhoods We Serve in Aurora

We cover Aurora from the older brick streets near Original Aurora and Hoffman Heights out through the newer subdivisions toward Southlands and the eastern plains edge, including the central neighborhoods sitting on bentonite clay. Older masonry chimneys and factory-built metal flues are both routine for us, and we quote each on what the inspection actually shows. Booked visits are dispatched Sunday through Friday, 7am to 7pm, and we’re closed Saturday.

  • Original Aurora
  • Hoffman Heights
  • Southlands
  • Central Aurora

Service Area – Cities Near Aurora

Aurora sits close enough to its neighbors that our coverage runs past the city line. We also book chimney work in Four Square Mile, CO, Holly Hills, CO, Acres Green, CO, and Meridian, CO. The housing stock changes as you cross those lines, but the approach doesn’t: we inspect before we sweep, document what we find, and quote the repair before we touch it. Call (855) 368-2029 to book.

Serving Aurora, CO – Our Local Coverage Area

We serve Aurora and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Company in Aurora

Ready to get started? Free estimates in Aurora
Call (855) 368-2029

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney cleaning pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Aurora Customers Say

★★★★★ 4.7 from 11+ reviews

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

- Brian Ziegler

"Fair price, competent work. The guy wasn't especially chatty and I had to ask twice to get a real explanation of what he'd done. Not a dealbreaker, just noting it."

- Dale Kowalski

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

- Yusuf Karam

How It Works in Aurora

Getting your chimney cleaning handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney cleaning needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Aurora. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7