Chimney Repair in Aurora, CO | Morningstar Chimney Sweep

Chimney Repair in Aurora - Inspected on Camera, Then Priced in Writing

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across Aurora

If you live in Aurora and your chimney is pulling apart at the mortar joints, tilting, or letting water in around the flashing, you’re in the right place. We handle chimney repair across Aurora, and we know this city’s housing well: brick ranches near Original Aurora and Hoffman Heights, 1990s and 2000s builds with factory-built metal flues out toward Southlands. That mix means two very different kinds of repair, and we don’t treat them the same way. Call (855) 368-2029 to book a repair estimate. We answer 24/7 and offer fast dispatch from 7am to 7pm, Sunday through Friday.

Call (855) 368-2029

Why Aurora Homeowners Call Morningstar Chimney Sweep for Chimney Repair

We’re a chimney specialist, not a general home-service company, and that focus is why Aurora homeowners keep our number. We inspect before we repair, and we show you the camera footage before we recommend anything. Our technicians have up to 8 years of experience, and every job ends with a clear account of what was found, what was done, and what can safely wait.

Our materials come from the same professional supply chain certified chimney professionals use nationwide: DuraFlex flexible liner systems, HeatShield flue resurfacing, Gelco and Famco caps and covers, Olympia Chimney and Copperfield components. No hardware-store patches.

For Aurora specifically, our knowledge of the local ground matters as much as the flue. We check for settlement and flue offsets as part of the assessment, because on this city’s older brick homes that’s frequently the real issue. When you call, we can talk through what’s happening and book a visit that fits your schedule.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Masonry Repair in Aurora

Chimney Masonry Repair in Aurora usually starts with mortar, not firebox work. The Front Range’s intense sun, dry air and sharp day-night swings spall mortar joints and crowns faster than in wetter climates, and once the crown cracks, water gets behind the brick and the damage accelerates. A typical masonry repair job in Aurora runs $450 – $1,800, depending on how much rebuilding is needed and how high the work sits. We document the condition with photos so you can see exactly where the mortar has failed.

Repointing and Tuckpointing

Repointing grinds out the failed mortar and packs in new material that matches the original joint profile. On a 1960s Aurora ranch, this is often the difference between a chimney that lasts another few decades and one that keeps taking on water. Tuckpointing follows the same idea with a finer finish where appearance matters.

Rebuilding and Crown Repair

When the top courses of brick have gone soft, or the crown has separated from the flue, we rebuild that section rather than patch over it. A new crown sheds water away from the masonry instead of letting it pool. We explain the scope in writing before any work starts.

Chimney Cap Installation in Aurora

Chimney Cap Installation in Aurora is one of the least expensive ways to slow down the damage that wind and water cause here. A properly fitted cap keeps rain, snow and birds out of the flue while still letting smoke escape, and we supply caps through the Gelco and Famco lines. Most Aurora cap installations run $250 – $650, including the fit and seal. If your chimney is uncapped, that’s usually the first thing worth doing.

Why Caps Matter on This Front Range

Aurora’s spring and fall wind events drive rain sideways into open flues, and that moisture feeds the freeze-thaw cycle that cracks masonry. A cap breaks that cycle at the top of the chimney. It also keeps debris and nesting animals from blocking the flue between service visits.

Custom versus Standard Fits

Older Aurora chimneys often have flue tiles that don’t match standard cap sizes, so we measure rather than guess. A custom-fit cap seals the crown properly and stays put in high wind. Standard caps work fine on many newer factory-built flues.

Trusted Brands We Service in Aurora

We work with professional-grade chimney products, and the brand names matter for a reason: they’re the parts that hold up. For relining, we use DuraFlex flexible liner systems, the industry standard for safe, code-compliant chimney relining. For flue resurfacing, HeatShield restores deteriorated liners without a full replacement, and it’s a specialist-only method. Caps and covers come through Gelco and Famco. We don’t claim to keep every part in stock, but we source from the same supply chain commercial chimney contractors use, so turnaround stays reasonable. When you call in Aurora, we’ll tell you honestly what’s needed and roughly how long it takes to get the materials.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Chimney Repair Problems We See in Aurora Homes

  • Settlement from bentonite clay soils. Much of Aurora’s western and central ground sits on expansive bentonite clay, and its seasonal movement tilts chimneys and separates flue joints on otherwise solid 1960s brick ranches. That’s why a camera inspection comes before a sweep here.
  • Cracked clay-tile liners. Many older Aurora homes still have original clay-tile flues that crack with age, letting creosote and moisture migrate into the masonry. It often gets misdiagnosed as a simple sweeping job.
  • Spalling crowns and mortar joints. Intense sun and wind-driven temperature swings break down the crown and joints, and water intrusion then speeds up liner deterioration. Annual inspections catch what a homeowner can’t see from the ground.
  • Separated joints on factory-built metal flues. The 1990s and 2000s Southlands-area subdivisions have prefab metal flue fireplaces, and their joints or caps can separate without any obvious sign until a Level 2 camera inspection finds the gap.

Pricing for Chimney Repair in Aurora, CO

We quote per job, and the written estimate sets the final price. Here’s what Aurora repair work typically runs:

  • Mortar repointing: $450 – $1,200
  • Spalling brick repair: $600 – $1,800
  • Chimney waterproofing: $350 – $800
  • Flashing repair: $300 – $750
  • Chimney cap installation: $250 – $650
  • Chimney rebuilding (upper section): $2,000 – $6,500

Those ranges move with height, access and how much masonry has to come out. On a bentonite-affected chimney, a HeatShield or DuraFlex reline may be the right fix instead of patching, and we’ll price that separately in writing. The inspection and estimate are free, and we tell you plainly when a repair can wait. Call (855) 368-2029 for an exact quote.

We Also Serve Cities Near Aurora

Our chimney repair work reaches beyond the city line into Four Square Mile, Holly Hills, Acres Green and Meridian, along with the rest of the metro area. If you’re just outside Aurora, the same inspection-first approach applies. We cover Aurora and these surrounding communities with the same standard of documentation and repair.

Serving Aurora, CO – Our Local Coverage Area

We serve Aurora and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in Aurora

Why Aurora Chooses Morningstar Chimney Sweep

We set the standard for chimney repair in Aurora.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Aurora

Getting your chimney repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Aurora Customers Say

Trusted by homeowners across Aurora and surrounding areas.

★★★★★

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

Brian Ziegler
★★★★★

"Fair price, competent work. The guy wasn't especially chatty and I had to ask twice to get a real explanation of what he'd done. Not a dealbreaker, just noting it."

Dale Kowalski
★★★★★

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

Yusuf Karam

Ready for Chimney Repair in Aurora?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Aurora.

(855) 368-2029

Request a Free Estimate in Aurora

Tell us about your chimney repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - We Answer 24/7